Год выпуска: 2007
Количество страниц: 12 с.
Издательство: ЯНЦ СО РАН
Год выпуска: 1997
Количество страниц: 300 с.
Издательство: Издательство ЯНЦ СО РАН
Год выпуска: 2000
Количество страниц: 120 с.
Издательство: Ахсаан
Год выпуска: 2008
Количество страниц: 276 с.
- Славен Труд = Үлэҕэ уруй! > Якутяне-Герои Труда,
- Золотая Якутия > Золотодобыча в Якутии с XIX века до 80-х гг. XX века,
- Золотая Якутия > Золотые имена: о людях, внесших вклад в золотопромышленность Якутии,
- Краеведение. Археология. География. Биографии. История,
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство.
Год выпуска: 2004
Количество страниц: 154 с.
Издательство: Книжное издательство
Год выпуска: 1986
Количество страниц: 184 с.
Количество страниц: 5 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
The article is devoted to the study of the effects of cryogenic treatment on the hydrophobic and hydrophilic properties of clay sands in order to increase the efficiency of their disintegration and enrichment processes. Experiments have shown that cryogenic treatment leads to selective destruction of dispersed formations, where processes occur that precede the process of disintegration, in which the weakest mechanical bonds are broken, and at the same time passivation of surface energy occurs, which is proved by experimental studies to establish the phenomenon of hydrophobization of the surface of finely dispersed mineral particles. The mechanism of this process is due to complex cyclic phenomena of cryogenic treatment, such as crystallization and recrystallization of water in microcracks and pores of dispersed particles. As a result of the cumulative effect, new pores and spaces are formed inside the conglomerates, which, upon subsequent freezing, forms a new ice structure that contributes to the rupture of the conglomerate. An important factor in the efficiency of cryoprocessing is the pre-saturation of samples with water, which gives the disintegration a volumetric character. The research methodology included the use of a new method of direct flotation without collectors, which makes it possible to assess the hydrophobicity of particles. The experiments were carried out on a laboratory flotation machine using a foaming agent to intensify the flotation process. Samples with a certain initial humidity were cryogenically processed using freeze-thaw cycles. The yield of the foam product was studied depending on the number of cycles and the use of the foaming agent. Studies have revealed stable dynamics of the hydrophobization process, with an increase in the disintegration effect from cycle to cycle. Cryogenic treatment, by breaking the bonds between the particles and opening the pores, allows air bubbles to fix on the surface of the particles, enhancing the process of disintegration in the water-air environment. The phenomenon of hydrophobization during cryogenic treatment explains the high disintegration effect of high-clay sands in the water-air environment. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022, Unified state information system for recording the results of research and development work No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center ҺYakut Scientific Center of the Siberian Branch of the Russian Academy of Sciencesһ (grant No. 13.TSKP.21.0016).
Ширман, Г. В. Гидрофобизация поверхности минеральных форм глинистых песков при криогенной обработке: механизм и последствия в области дезинтеграции и обогащения / Ширман Г. В. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 12. - С. 230-234. - DOI: 10.17513/use.38197
DOI: 10.17513/use.38197
Количество страниц: 6 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
For the effective enrichment of gold-containing concentrates and heavy concentrate with a high content of magnetic minerals, a beneficiation method in a jigging machine with a magnetic system has been proposed in the laboratory of the Laboratory mineral processing of the Institute of Mining of the North SB RAS. In the proposed method, a combination of gravitational enrichment and magnetic separation is carried out in a jigging machine. The most important factor in the process of effective extraction of gold from concentrate enrichment products containing iron scrap and minerals with high magnetic susceptibility in a jigging machine is the constant loosening of the forming natural bed. Subsequently, the method was improved and an electric pulse source was developed to create a pole-alternating magnetic field, which makes it possible to ensure a loosened state of the bed. A physical and mathematical model has been developed based on a Fokker - Planck type equation to determine the probability of particles passing through the thickness of a bed under the condition of the required state of loosening. Approbation of the model shows that the obtained calculations correlate with the results of experiments on a jigger with an electromagnetic installation under the conditions of the jiggering process: jigger cycle frequency 210 min-1, bed height 80 mm, amplitude 6 mm and pulse duration of the pole-alternating magnetic field from 0,1 sec. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022, Unified state information system for recording the results of research and development work No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center ҺYakut Scientific Center of the Siberian Branch of the Russian Academy of Sciencesһ (grant No. 13.TSKP.21.0016).
Слепцова, Е. С. Физико-математическая модель проницаемости тяжелых частиц через магнитную постель отсадочной машины с полюс опеременным магнитным полем / Слепцова Е. С., Яковлев Б. В., Матвеев А. И. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 12. - С. 218-223. - DOI: 10.17513/use.38195
DOI: 10.17513/use.38195
Количество страниц: 6 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
The results of experimental studies to identify changes in the aerodynamic properties of particles of a malleable useful component (gold) during the disintegration process on a fundamentally new laboratory two-stage cone impact mill are presented. Lead markers of various configurations, as well as random particles of ore gold, act as gold simulators. This mill is designed specifically for the chain of dry concentration devices. The mill includes two zones of destruction of geomaterials. The upper elongated cone-shaped zone formed between the working rotor and the inner surface of the installation housing. Due to the narrowing of the space between the working surfaces, close contact of ore particles is created with each other and with the working bodies. In the lower sequential zone, in the zone of free movement of particles by rolling along the surface of the external working rotor, intensive forging of lamellar particles of the useful component of the ore occurs by the flow of pelitic ore material formed during the destruction process in the upper zone of the mill. In the process of conducting laboratory research on the particles of the useful component, a close analogy was discovered in the properties of their behavior in an aerodynamic and liquid environment. The soaring speed (SV) of gold particles less than 2 mm, with the same physical parameters, as well as their hydraulic size (HF), depends only on the thickness. At the same time, in the mill during the grinding process, the particles of ore gold undergo thickening of the edges. Processed particles of lead markers and gold retain their physical weight, and their degree of extraction by dry enrichment increases by 1.5-2 times due to isometrization of forms. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center ҺYakut Scientific Center of the Siberian Branch of the Russian Academy of Sciencesһ, grant No. 13. Center for collective use 21.0016.
Осипов, Д. А. Изменение аэродинамических свойств частиц полезного компонента в двухступенчатой конусной мельнице / Осипов Д. А. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 180-185. - DOI: 10.17513/use.38161
DOI: 10.17513/use.38161